 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Silicon Avalanche Diodes Unpackaged High Power Transient Voltage Suppressors 15KP CELLS Designed to protect sensitive electronics which operate within an environment of lightning induced, short duration, high current pulses. The 15KP cell series is specifically designed for high power, space limited applications. The cell construction provides three high power T.V.S. die connected in series via heat sinking electrodes. Devices can be soldered to a substrate via one electrode; connection to the other electrode can then be made by soldering a suitable jumper. These devices are designed so they can be used in series/parallel configuration in order to provide a very high power capability that is a far superior solution than using Metal Oxide Varistors. The low clamping voltage, high speed response and infinite life (if the maximum rating is not exceeded) make this ultimate protection for sensitive electronics. (R) Characteristics @25C case temp (unless otherwise noted) Part Working Number voltage (Vr) volts 15KP66CA 66 Breakover Maximum Minimum Maximum Peak Voltage (bv) leakage clamping Pulse Current (lpp) @ Vcl @It current voltage (Note 3) min It (Ir) @ Vr (Vcl) @lpp volts 73.2 mA 1.0 A 10.0 volts 35.0 amps 1500 FEATURES * 144,000 watts Peak Pulse Power based on 8/20S (applies to a single device). Devices can be arranged in series/parallel to increase surge handling capability. ABSOLUTE MAXIMUM RATINGS @25C case temp (unless otherwise noted) SYMBOL PPP PM (AV) Vf PARAMETER Peak Pulse Power 8-20sec. Pulse Steady state power dissipation (note 1) Maximum instantaneous forward voltage @100amps (note 2) Junction Temperature Storage Temperature VALUE 144,000 6.5 10.5 Units W W V Note 3. Using 8/@20S pulse as defined by ITU. Other voltages are available on request. Individual 5KP cells also available, please contact sales for details. Tj Tstg -55 to 150 -55 to 150 C C Note 1. Mounted on copper pad area 40mm square. Note 2. Using 300 microsecond square pulse; applies to unidirectional only, and a single device only. For devices used in series, this value should be multiplied by the number of devices. 3.30 +/- 0.20 6.86 +/- 0.13 All dimensions in mm unless otherwise stated 306 w w w. l i t t e l f u s e . c o m |
Price & Availability of 15KP66CA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |